青青草原av在线免费,亚洲最大最淫熟女网五十路,国产va亚洲vaxxoo,99久久免费观看黑人精品,国产av丝袜美腿视频一区,中国黄色av一级片,亚洲mv在线观看视频,毛片黄页网站在线观看,成人午夜黄色免费网站

UV裝飾板是目前市場上最新型的環保裝飾材料，不僅環保健康，且裝飾效果好，表面采用UV光固化漆保護處理，耐磨，耐劃痕，耐污染腐蝕，抗熱耐冷，頗受消費者喜愛。限免給大家介紹UV裝飾板的安裝方法。
UV decorative board is currently on the market the new type of environmentally friendly decorative materials, not only environmental health, and good decorative effect, the surface of the UV light curing paint protection, abrasion resistance, scratch resistant, anti fouling corrosion, thermal resistance to cold, popular. Limited to everyone to introduce the installation method of UV decorative board.

一、用墻面膠安裝
First, use wall glue installation
1、在墻面上覆上一面基層，常用的是3MM的三合板，木工板，好點是防火玻鎂板。用氣釘把它們釘在墻面上，并用沙紙將板面清潔干凈。
1, on the wall covered with a base, commonly used is 3MM three plywood, carpentry board, the good point is fireproof glass magnesium board. Gas nail nail them on the wall, and the clean surface with sandpaper.
2、鋸板，將UV裝飾板按實際要求鋸成一塊塊的。
2, saw plate, UV decorative board according to the actual requirements saw a block.
3、倒邊，將要安裝的UV板四邊用倒邊機倒成45度角。根據實際安裝要求，有的只需倒上下兩邊或是三個邊。
3, inverted side, the UV board will be installed with four sides of the inverted side machine into 45 degrees angle. According to the actual installation requirements, some only need to top or lower sides or three sides.
4、清潔UV板背面，用沙紙和抹布將UV板背面清潔干凈。
4, clean the UV plate with sandpaper and back cloth to clean the board back UV.
5、把萬能膠或木工膠均勻涂在UV裝飾板背面，然后將UV裝飾板平整地貼在墻面上，再用手輕輕錘打UV裝飾板，讓UV裝飾板更加牢固粘在墻面上。
5, the adhesive or wood glue evenly coated on the back of the decorative plate UV, and then UV decorative board smoothly on the wall, then gently hammering UV decorative board, let UV decorative board more firmly stick on the wall.
6、調水性填縫料，然后將填縫料填在兩張UV裝飾板45度角相交處，先填滿，再用木板垂直角從45度角相交處輕輕劃過，這樣相交處就美觀了。
6, adjust the water filling material, and then fill the filling material in two UV decorative board 45 degrees angle intersection, first fill, and then wood vertical angle from 45 degrees angle intersection lightly rowed, so that intersection is beautiful.
7、清潔UV裝飾板表面，將多余的填縫料清潔干凈。
7. Clean the surface of UV decorative board, clean the excess caulking material.
二、鋁合金固定
Two. Aluminum alloy fixation
1、在墻面上覆上一面基層，常用的是3MM的三合板，木工板，好點是防火玻鎂板，用氣釘把它們釘在墻面上。
1, on the wall covered with a base, commonly used is 3MM three plywood, carpentry board, the good point is fireproof glass magnesium plate, with air nail to nail them on the wall.
2、在墻面上釘腳線。用鋁合金陰角固定墻角、再用鋁合金工具條固定墻角。也就是分別把鋁合金陰角和鋁合金工具條分別用釘子釘在墻面的相應位置。
2, nailing the foot line on the wall surface. Fix the corner with the aluminum alloy negative angle, and then fix the corner with the aluminum alloy tool bar. That is to say, the aluminum alloy negative angle and aluminum alloy tool bar are respectively nailed in the corresponding position of the wall.
3、再就是鋸UV裝飾板。將UV板按實際要求尺寸鋸成一塊一塊的，再將鋸邊用沙紙修整平整和干凈。
3, and then saw UV decorative board. The UV board according to the actual requirements of the size of sawing a piece, then sawing with sandpaper smooth and clean dressing.
4、再將UV裝飾板嵌入鋁合金陰角和工具條之間就行了。
4, and then UV decorative plate embedded in aluminum alloy Yin angle and tool bar between the line.
我們以優良的產品，完美的服務，可靠的信譽，為您的事業成功助一臂之力，竭誠歡迎各界同仁惠顧洽談業務！
We have a good product, perfect service, reliable reputation, to help your career success, and sincerely welcome all walks of life Tongren negotiate business!